Panasonic Section 700 Operation page 65

Chapter 2. System Features
l
l
l
l
l
l
l
l
l
Considerations
l
l
l
l
l
l
FF4 (Ringing and Hunt Groups): Hunt .Group Transfer Timer
FF4 (Ringing and Hunt Groups): Hunt Group Extension Number
FF4 (Ringing and Hunt Groups): Transfer Extension Number
FF4 (Ringing and Hunt Groups): CO Delayed Day Ring Assignments for
Hunt Group Pilot Numbers
FF4 (Ringing and Hunt Groups): CO Delayed Night Ring Assignments for
Hunt Group Pilot Numbers
FF4 (Ringing and Hunt Groups): Central Office Day Ring Assignment for
Hunt Group Pilot Numbers
FF4 (Ringing and Hunt Groups): Central Office Night Ring Assignment
for Hunt Group Pilot Numbers
FF4 (Ringing and Hunt Groups): Ringing Assignments (all)
Version 3.1 or higher)
Eight Station Hunt Groups can be programmed. A single Hunt Group can
contain up to sixteen extensions (CPC-AII and CPC-B Version 6.0 or
higher) or eight extensions (CPC-B Version 2.0 to 5.04) plus a pilot
extension number.
The transfer destination of any Hunt Group can be set to the pilot number
of the next group, the pilot number (0) of the Attendant Group, the pilot
number of the same group, or a real extension. The transfer destination
cannot be voice mail.
A Transfer Timer adjusts the transfer time between hunt groups. The
transfer time can be set from 0 to 32 seconds. If the timer is set to 0
seconds, CO calls will be queued at the hunt group until a member is
available. Intercom calls will also queue.
Central office trunks can be set to terminate to different hunt group pilot
numbers during day and night mode operation.
With CPC-AII and beginning with CPC-B 3.1, the Hunt Group No Answer
Timer determines how long a hunt group member rings before the call is
transferred to the next hunt group member. In previous releases, this time
was determined by the Call Forwarding--No Answer Timer.
With CPC-AI1 and beginning with CPC-B Version 4.0, a call arriving at
the the pilot number of a hunt group will hunt to a member that has call
Section 700 - Operation