Table of Contents
Advertisement
Section 700 - Operation
To retrieve a call parked by the attendant (after receiving the park
number from the attendant):
1. Pick up the handset.
2. Dial "76."
3. Enter the Park Number assigned to the call.
Related Programming
l
l
Considerations
l
l
l
The phone issues intercom dial toned.
"PARK PICK XX" (where "xx" is the park number) appears, and then
"CO TALK #XX' (where "XX" is the trunk number of the call) appears.
An alarm tone is issued if a parked call is not released before the Park
Recall Timer expires. If this happens, the user that parked the call can
retrieve it by picking up the handset. If no one retrieves the call after the
Park Recall Timer expires, a second alarm is issued at the attendant
phone(s).
You cannot park more than one outside line at a time.
The Call Park Recall Timer is similar to the Recall Timer, except that when
the Call Park Recall Timer is set for "0" a call automatically recalls in three
minutes.
Chapter 5. DSLT Features
Advertisement
Table of Contents
