Panasonic Section 700 Operation page 100

Section 700 - Operation
Figure 3-2. VB-43225 with a DSS/72 configured as an Attendant Console
Related Programming
l
l
Hardware Requirements
l
l
Note: Beginning with CPC-B Version 5.0, the Attendant Feature Package
(AFP) is no longer provided.
FF3 (Extensions): Terminal Type
The "Attendant Feature Package" is required to configure the DSW72 as an
Attendant Console. The "Attendant Feature Package" is contained on a
special EPROM chip that replaces an EPROM on the CPC-B card.
Note: Beginning with CPC-B Version 5.0, the Attendant Feature Package
(AFP) is no longer provided.
The following table shows the number of DSS/72s and or Attendant
Consoles that can be used.
M
Chapter 3. Attendant Features
I I
3-15