Table of Contents
Advertisement
Section 700 - Operation
If the Automatic Outside Line Hold feature is programmed for your
system, pressing any other line key will place your original call on System
Hold.
A held call will recall if it is not retrieved before the Hold Recall Timer
expires. "Hold Recall #XX" (where "XX" is the outside line number)
appears on the display if a call has been held beyond the time limit.
If you press the HOLD key during a conference with two outside lines.
both outside lines will be placed on hold.
If your system is set to onhook transfer and you have placed an outside call
on hold, and you then make an Intercom Call, make sure the other
extension presses the FLASH key or hangs up before you do. Lf you hang
up before the other extension, the held outside line will be trarlsfcued to
that extension.
If there is no response to the Hold Recall, the tone is
Attendant Phone (extension 100 or 10). However, no tone is issued at the
Attendant Phone if Night Mode is activated or if the call is on a Private
Line.
An error tone is issued if you attempt to place more than one intercom call
on hold at the same time.
The DBS can provide Music-on-Hold to callers placed on hold. See
"Music-On-Hold" (page 2-34) for more information.
Chapter 4. Key Telephone Features
issued at the
4-19
Advertisement
Table of Contents
