Station Lockout Code Assignment - Panasonic Section 700 Operation

700 - Operation
Section

Station Lockout Code Assignment

(All Versions)
Description
The Station Lockout feature allows users to dial a Station Lockout code to
restrict their phone from being
Station Lockout codes can be assigned through the attendant phone.
Operation
To program a Station Lockout code:
1. Press the ON/OFF key.
2. Press the CONF key.
3. Dial "#8."
4. Dial the extension number.
5. Enter the desired key code (four digits).
6. Press the HOLD
7. Press the ON/OFF key.
Considerations
l
l
the personal VM key is not assigned to the lowest-numbered key, it will not
flash to indicate VM messages.
The phone issues intercom dial tone.
l
The ON/OFF LED lights.
l
key.
"STORE XXXX" (where "XxXx" is the key code) appears on the
display.
The ON/OFF LED goes off.
A locked extension can be used for Intercom Calls.
Station Lockout key codes can also be set through system programming.
Chapter 3. Attendant
used
for outside calls.
Features