Call Waiting - Panasonic Section 700 Operation

Section 700 - Operation

Call Waiting

(All Versions)
Description
You can send a Call Waiting signal, followed by a brief LCD message, to a
busy extension. The party receiving the message need only replace the
handset and then pick it up again to be automatically connected to your
extension.
The following messages can be sent using the Call Waiting feature:
Table 5-4. Call Waiting Text Messages
Message codes O-4 cannot be used.
Operation
To Set Call Waiting:
1. Lift the handset.
2. Dial-the extension number.
3. Upon hearing busy tone, press "3."
4. If you wish to send a text message, dial the desired message code (5-7 or
5. Remain on the line until the called party picks up.
To answer Call Waiting (after disconnecting the current call):
1. Replace the handset.
Message
Code
5
I 7
9
9).
The message appears on the called party's phone if the called party has a
display phone. (If the extension does not have a display, it will continue to
issue a call waiting tone.)
Chapter 5. DSLT Features
Message
"Visitor Here"
I
"Emergency"
I
I