Auto Redial; Barge-In For Direct Lines - Panasonic Section 700 Operation

Digital business system
Hide thumbs Also See for Section 700:
Table of Contents

Advertisement

Chapter 4. Key Telephone Features

Auto Redial

and
CPC-B Version 7.0 or higher)
Description
If the Redial key is pressed when the extension is idle or receiving dial tone,
the last intercom or outside number is automatically redialed.
Related Programming
FF3 (System): Auto-Redial on Extensions
l

Barge-In for Direct Lines

Description
Barge-in for Direct Lines allows users to break into a busy Direct Line (DL)
and create a three-party conference. '
A direct line is a call appearance used to originate and receive calls over a
specific trunk number.
Operation
To barge into a busy Direct fine, press the lit DL key. (The DL key will be lit
red.)
Related Programming
Barge-in for Direct Lines is controlled by the program settings for Busy
Override. For instance, if an extension with a DL key does not want theDL
broken into, that extension must have "Busy Override Receive" turned off.
Considerations
Paging Groups, Both extensions must belong to the same paging group (l-
7). Paging group 0 does not allow override.
Override Restrictions. Barge-in for Direct Lines cannot override a DL under
the following conditions:
l
4-6
When the DL is in a conference call
DBS Manual - Issued 8/l/95
Section 700 - Operation
UBS-70-700

Advertisement

Table of Contents
loading

Table of Contents