Speaker
Before you begin:
v Read "Safety information" on page 129.
v Read "Installation guidelines" on page 31.
v Review the information in "System reliability considerations" on page 31.
Complete the following steps to remove the speaker:
1. Turn off the computer and attached devices; then, disconnect all external cables
2. Remove the cover and the frame-support bracket (see "Removing the cover" on
3. Rotate the diskette drive cage to its vertical position.
4. Disconnect the speaker cable from the system board.
5. Lift the speaker up and out of the side brackets.
To replace the speaker, reverse the previous steps.
Power supply
Before you begin:
v Read "Safety information" on page 129.
v Read "Installation guidelines" on page 31.
v Review the information in "System reliability considerations" on page 31.
Complete the following steps to remove the power supply:
1. Turn off the computer and attached devices; then, disconnect all external cables
2. Remove the cover and the frame-support bracket (see"Removing the cover" on
and power cords.
page 34 and "Removing and installing the support bracket" on page 35).
Retainer slots
and power cords.
page 34 and "Removing and installing the support bracket" on page 35).
FRU information (service only)
79