Application; Figure 52: Application Screen - Quasar CM-4251 Series User And Installation Manual

7.3.8 Application

The Application screen enables control over the input and output alarms. If, for example, an event is
recognized by the system, an input or output alarm and message is generated.
The alarm input and output connectors are shown in the table below.
Alarm Switch
The Administrator can enable or disable the alarm function (Off/On).
Alarm Type
Select an alarm type (Normal close or Normal open) that corresponds to the alarm application.
Alarm Output
Define the normal alarm output signal as Normal Close or Normal Open, according to the current
alarm application.

Figure 52: Application Screen

Table 5: Input/Output Alarm Connections
Pin No. Designation
1 Input (-)
2 Input (+)
3 Output (-)
4 Output (+)
Configuration and Operation
53