Figure 37: Https Screen - Install Signed Certificate; Figure 38: Https Screen - Upload Signed Certificate - Quasar CM-4251 Series User And Installation Manual

Quasar CM-4251 Series User and Installation Guide
To create a certificate request:
1. Click Create Certificate Request to create and submit a certificate request in order to obtain
a signed certificate from a CA.
2. Provide the requested information in the Created Request field. Refer to Provide the
Certificate Information in this section for details.
3. When the request is complete, the subject of the Created Request is shown in the field. Click
Properties below the Subject field, copy the PEM-formatted request and send it to your CA.
4. When the signed certificate is returned from the CA, install it by uploading the signed
certificate as seen in Figure 38.
38
Figure 37: HTTPS Screen – Install Signed Certificate
Figure 38: HTTPS Screen – Upload Signed Certificate