Network; Figure 43: Network Screen - Quasar CM-4251 Series User And Installation Manual

7.3.3 Network

From the System screen, click the Network tab. A drop-down menu appears with tabs including
Basic, QoS, SNMP, and UPnP.
Related Links
 
Basic QoS (Quality of Service)
7.3.3.1 Basic
You can connect to the camera with either fixed or dynamic (DHCP) IP address. The camera also
provides PPPoE (Point-to-Point Protocol over Ethernet) support for users who connect to the
network via PPPoE.
The screen is divided into three sections: General, Advanced and IPv6 Configuration. See Figure 43:
Network Screen.
1. General
Select one of the following options in the General area for configuring network settings:

Get IP address automatically (DHCP)
If you select Get IP address automatically, you can use the DNA utility, which is provided in the
supplied CD, to obtain the IP address. See
Note:
For future reference, record the camera's MAC address, which is found on the
camera label.

Figure 43: Network Screen


SNMP Settings
Using the DNA Utility to Search and Access the
Configuration and Operation

UPnP
Camera.
43