Figure 33: Editing Password And Privileges; Figure 34: Modifying Account Authority - Quasar CM-4251 Series User And Installation Manual

Quasar CM-4251 Series User and Installation Guide
Manage User

To delete a user, pull down the user list and select the user name to delete. Click Delete to
remove it.

To edit a user, pull the user list down and select a user name. Click Edit to edit the user's
password and privileges.
Note:
You must enter the user password and also select the authorized function(s).
When finished, click Save to modify the account authority.
7.3.2.2 HTTPS
To use HTTPS on the camera, an HTTPS certificate must be installed. The HTTPS certificate can be
obtained either by creating and sending a certificate request to a Certificate Authority (CA) or by
creating a self-signed HTTPS certificate as described below.
Note:
The self-signed certificate does not provide the same level of security as a
CA-issued certificate.
36

Figure 33: Editing Password and Privileges

Figure 34: Modifying Account Authority