Schedule; Figure 65: Schedule Screen - Quasar CM-4251 Series User And Installation Manual

Quasar CM-4251 Series User and Installation Guide

7.3.14 Schedule

The Schedule screen is used by the network failure detection, tampering and motion detection
functions. To access the schedule function, open the Main window, select the System tab, and click
on the Schedule tab. The functions in this tab allow administrators to create customized schedules
for the camera using this option. If a schedule exists, the administrator can apply that schedule to
this camera using the available dropdown. See Figure 65: Schedule Screen.
Note:
This application is not the same as the Recording Schedule function.
To create a new schedule or edit an existing schedule:
1. Click on the appropriate checkboxes relating to the days of the week (Sun, Mon, Tue,
Wed, Thu, Fri and Sat) to create a schedule. Tuesday (Tue) is checked in the example.
See Figure 65.
2. Set Start time (for example, 09:00) and Duration (for example, 4:00 hours).
3. Click Save to apply the newly created schedule to the camera.
Removing Schedules
To remove a schedule:
1. Select the setup data line by line.
2. Click Delete to remove.
68

Figure 65: Schedule Screen