Installation; Indoor Installation; Outdoor Installation - Quasar CM-4251 Series User And Installation Manual

5 Installation

Follow the instructions below for indoor and outdoor installation of the Quasar CM-4251 series
camera.
Related Links


Indoor Installation


Initial Camera Configuration
5.1 Indoor Installation
Read the instructions provided in this chapter thoroughly before installing the CM-4251-10-I camera.
Following are additional considerations for indoor installation:

There must be a fuse or circuit breaker at the starting point of the electrical wiring
infrastructure.

For indoor installations, such as industrial applications, the camera must be protected from
hostile external elements (e.g. corrosive environment, metallic dust, extreme temperatures,
soot, moisture, over spray, etc.).

Do not place the camera on or near radiators and heat sources.

All electrical work must be performed in accordance with local regulatory requirements.

5.2 Outdoor Installation

Read the instructions provided in this chapter thoroughly before installing the CM-4251-11-I camera.
Following are additional considerations for outdoor installation:

For outside wiring installation, always use weatherproof equipment, such as boxes,
receptacles, connectors, etc.

For electrical wiring, use the properly rated sheathed cables for conditions to which the
cable will be exposed (for example, moisture, heat, UV, physical requirements, etc.).

Plan ahead to determine where to install infrastructure weatherproof equipment. Whenever
possible, ground components to an outdoor ground.

Use best security practices to design and maintain secured camera access, communications
infrastructure, tamper-proof outdoor boxes, etc.

All electrical work must be performed in accordance with local regulatory requirements.

Outdoor Installation

Removing the Base Plate

Power and Ethernet
Cable Connection

Mounting Instructions
Installation
9