Figure 35: Https Screen; Figure 36: Https Screen - Create Self-Signed Certificate - Quasar CM-4251 Series User And Installation Manual

HTTPS allows secure connections between the camera and web browser using Secure Socket Layer
(SSL) or Transport Layer Security (TLS) to protect camera settings and username/password info. A
self-signed certificate or a CA-signed certificate is required to implement HTTPS. Under the Security
category, click the HTTPS tab in the sidebar to display the following screen.
To create a self-signed certificate:
Before a CA-issued certificate is obtained, you can first create and install a self-signed certificate.
1. On the HTTPS page, click Create under Create self-signed certificate.
2. Provide the requested information to install a self-signed certificate for the camera. Refer to
Provide the Certificate Information in this section for details.

Figure 35: HTTPS Screen

Figure 36: HTTPS Screen – Create Self-Signed Certificate
Configuration and Operation
37