Figure 53: Application - Record Stream To Sd Card - Quasar CM-4251 Series User And Installation Manual

Quasar CM-4251 Series User and Installation Guide
Triggered Action
The Administrator can specify various alarm actions to be taken when an alarm is triggered. The
options are listed below.

Enable alarm output – Select this box to enable alarm relay output.

Record stream to sd card – Select this box in order to save the alarm-triggered recording to
your microSD/SDHC card. Enter the number of seconds for the pre-trigger buffer. Select the
first radial button if you wish to upload for a specified length of time and enter the number
of seconds. Alternatively, select the second radial button to upload during the active trigger.
See Figure 53: Application – Record Stream to SD Card.
Note:
Make sure that local recording (with a microSD/SDHC card) is activated so that this
function can be implemented. See

Send Message by FTP/E-Mail – Select whether to send an alarm message by FTP and/or
e-mail when an alarm is triggered.
54
Figure 53: Application – Record Stream to SD Card
Recording for further details.