Figure 19: Windows Firewall Screen; Figure 20: Discovered Ip Devices; Figure 21: Dna Assign Ip - Use Dhcp Dialog Box - Quasar CM-4251 Series User And Installation Manual

5. To continue, click Allow Access. Latitude users should consult the Latitude Installation
Instructions on disabling the Windows Firewall.
6. Click Assign IP. All the discovered IP devices will be listed in the page, as shown in the figure
below. The camera's default IP Address is automatically supplied by the DHCP server.
7. Right-click the camera whose network property is to be changed. From the menu that
opens, select Network Setup. The Network Setup dialog is displayed.
Tip:
Record the camera's MAC address for future reference.
Using the DNA Utility to Search and Access the Camera

Figure 19: Windows Firewall Screen

Figure 20: Discovered IP Devices

Figure 21: DNA Assign IP – Use DHCP Dialog Box
21