BMW 1 Series Installation Instructions Manual
  1. Manuals
  2. Brands
  3. BMW Manuals
  4. Automobile Accessories
  5. 1 Series
  6. Installation instructions manual
BMW 1 Series Installation Instructions Manual

BMW 1 Series Installation Instructions Manual

Retrofit bmw accessory menu (acm) for bmw 1 series (e87); bmw 3 series (e90, e91, e92); bmw 5 series (e60, e61); bmw 6 series (e63, e64);
Hide thumbs Also See for 1 Series:
Table of Contents

Advertisement

Quick Links

See also: Owner's Manual
Original BMW Accessories.

Installation Instructions.

Retrofit BMW Accessory Menu (ACM)
BMW 1 Series (E 87)
BMW 3 Series (E 90, E 91, E92)
BMW 5 Series (E 60, E 61)
BMW 6 Series (E 63, E 64)
Installation instructions only valid for cars with M-ASK or CCC.
Retrofit kit no.:
65 50 0 418 002
65 50 0 422 701
Installation time
The installation time is approx 1.75 hours, but may vary depending on the condition of the car and the equipment
in it.
Cars without auxiliary connection only
In general the car must be upgraded to the latest I stage status by flashing before starting the work. Depending on
the production age of the car and the work already carried out on the car, the programming times will vary, which
means that we cannot quote a specific time at this point.
The installation time does not include any time for programming/encoding, as this depends on the age of the car
and the equipment in it.
Important information
These installation instructions are primarily designed for use within the BMW dealership organisation and by
authorised BMW service companies.
In any event, the target group for these installation instructions is specialist personnel trained on BMW cars with
the appropriate specialist knowledge.
All work must be completed using the latest BMW repair manuals, circuit diagrams, servicing manuals and work
instructions, in a rational order, using the prescribed tools (special tools) and observing current health and safety
regulations.
To avoid unnecessary extra work and/or costs, if any installation or function problem occurs, after a
brief troubleshooting session (approx. 0.5 hours), please contact the following:
1. Either your national subsidiary or your regional office, or
2. The Support team via the Aftersales Assistance Portal (ASAP) using the optional technical parts
support application.
Specify the chassis number and the part number of the installed retrofit kit and give a precise
description of the problem.
Do not archive the hard copy of these installation instructions since daily updates are made by ASAP!
© BMW AG, Munich
Retrofit kit BMW accessory menu ACM E90, E91, E92, E60, E61 and E63, E64
Retrofit kit BMW accessory menu ACM E87
01 29 0 420 167
8/2006
(Z/Z)
1

Advertisement

Table of Contents
loading

Related Manuals for BMW 1 Series

Summary of Contents for BMW 1 Series

  • Page 1: Installation Instructions

    These installation instructions are primarily designed for use within the BMW dealership organisation and by authorised BMW service companies. In any event, the target group for these installation instructions is specialist personnel trained on BMW cars with the appropriate specialist knowledge.
  • Page 2 Ensure that the cables/lines are not kinked or damaged as you install them in the car. Costs incurred as a result of this will not be reimbursed by BMW AG. Additional cables/lines that you install must be secured with cable ties.

  • Page 3: Table Of Contents

    17. Circuit diagram ................27 © BMW AG, Munich...

  • Page 4: Parts List

    Sealing strip (5x) Fusible link 7.5 A (large, for E60, E61, E63 and E64 cars) Black 12-pin socket casing Fusible link 7.5 A (small, for E87, E90, E91 and E92 cars) © BMW AG, Munich 01 29 0 420 167 8/2006 (Z/Z)

  • Page 5: Preparatory Work

    Release cover for oddments box (E90 and E91 cars) 51 16 212 Trim at the bottom right of the dashboard 51 45 181 Glove box with casing 51 16 366 Undo the fuse holder on the right © BMW AG, Munich 01 29 0 420 167 8/2006 (Z/Z)

  • Page 6: Retrofit Cable Connection Diagram

    In the luggage compartment on the left Cable loop Terminal GE/RT Cars with CCC only Tie back 0.5 mm For cars with M-ASK only Cut through, insulate and tie back © BMW AG, Munich 01 29 0 420 167 8/2006 (Z/Z)
  • Page 7 PIN 1 Fuse holder Tie back on wiring harness Black 26-pin socket casing To ACM unit C Black 18-pin plug casing For camera system connection Tie back on wiring harness © BMW AG, Munich 01 29 0 420 167 8/2006 (Z/Z)

  • Page 8: Connection Cable Connection Diagram

    On M-ASK E87, E90, E91 and E92 cars with CCC only X13820 On CCC with coding removed E60, E61 and E63, E64 cars only To ACM unit C X13820 © BMW AG, Munich 01 29 0 420 167 8/2006 (Z/Z)

  • Page 9: Installation And Cabling Diagram For E87 Cars

    087 0752 Z Legend Retrofit cable Connection cable ACM unit Universal CAN interface Black 18-pin plug casing Black 18-pin plug casing Earth post connection X490 Fuse holder Radio reception unit Controller © BMW AG, Munich 01 29 0 420 167 8/2006 (Z/Z)

  • Page 10: Installation And Cabling Diagram For E90, E91 And E92 Cars

    090 1034 Z Legend Retrofit cable Connection cable ACM unit Universal CAN interface Black 18-pin plug casing Black 18-pin plug casing Earth post connection X490 Fuse holder Radio reception unit Controller © BMW AG, Munich 01 29 0 420 167 8/2006 (Z/Z)

  • Page 11: Installation And Cabling Diagram For E60, E61 And E63, E64 Cars

    Installation and cabling diagram for E60, E61 and E63, E64 cars 060 1083 Z Legend Retrofit cable Connection cable ACM unit Universal CAN interface Black 18-pin plug casing Black 18-pin plug casing Control display Radio reception unit Controller © BMW AG, Munich 01 29 0 420 167 8/2006 (Z/Z)

  • Page 12: To Install And Connect The Retrofit Cable

    - White/blue or black cable from PIN 2, in PIN 2 - White/brown or transparent cable from PIN 8 in PIN 3 Connect socket casing E to branch A2, black 3-pin plug A3-A5 casing. 060 1086 Z © BMW AG, Munich 01 29 0 420 167 8/2006 (Z/Z)
  • Page 13 Disconnect branches A6 and A7 from branches A8 and A9 (not required). Route branches A8 and A9 under the centre console (2) along the standard wiring harness to the controller (1). 087 0737 Z © BMW AG, Munich 01 29 0 420 167 8/2006 (Z/Z)
  • Page 14 Disconnect plug X10387 from the controller (1) and connect to branch A9, black 8-pin plug casing. Connect branch A8, black 8-pin socket casing, to the controller (1). X10387 087 0738 Z © BMW AG, Munich 01 29 0 420 167 8/2006 (Z/Z)

  • Page 15: To Connect The Electrical Power Supply And Connection Cable For E87 Cars

    Route the plug (2) on the existing signal cable (1) to the installation site of the ACM unit. Connect branch B1 (violet 10-pin plug) on connection cable B to the installation site of the ACM unit. 087 0732 Z © BMW AG, Munich 01 29 0 420 167 8/2006 (Z/Z)
  • Page 16 B to the installation site of the ACM unit. 087 0733 Z Remove coding (1) from branch B2 (white 10-pin plug). Connect branch B2 to the CCC (2) as shown. 090 1039 Z © BMW AG, Munich 01 29 0 420 167 8/2006 (Z/Z)

  • Page 17: To Connect The Electrical Power Supply And Connection Cable For E90, E91 And E92 Cars

    Connect branch B1 (violet 10-pin plug) on connection cable B to the installation site of the ACM unit. 090 1095 Z Connect branch B2 (white 10-pin plug) to the M-ASK (1). 090 1038 Z © BMW AG, Munich 01 29 0 420 167 8/2006 (Z/Z)
  • Page 18 B to the installation site of the ACM unit. 090 1096 Z Remove coding (1) from branch B2 (white 10-pin plug). Connect branch B2 (white 10-pin plug) to the CCC (2) as shown. 090 1039 Z © BMW AG, Munich 01 29 0 420 167 8/2006 (Z/Z)

  • Page 19: To Connect The Electrical Power Supply And Connection Cable For E60, E61 And E63, E64 Cars

    Connect branch B1, violet 10-pin plug, of connection cable B on the control display (1). Route branch B2, white 10-pin plug, to the footwell on the driver’s side. 060 1090 Z © BMW AG, Munich 01 29 0 420 167 8/2006 (Z/Z)

  • Page 20: To Install The Acm Unit And Universal Can Interface For E87 Cars

    Connect branch A1 to the universal CAN interface D. Tie back any excess cable to the standard wiring harness. Tie back branch A16. 087 0753 Z © BMW AG, Munich 01 29 0 420 167 8/2006 (Z/Z)

  • Page 21: To Install The Acm Unit And Universal Can Interface For E90, E91 And E92 Cars

    F. Ensure that the steering column can still move freely as required. 090 1042 Z Affix the sealing strip I to universal CAN interface D. 090 1073 Z © BMW AG, Munich 01 29 0 420 167 8/2006 (Z/Z)
  • Page 22 CAN interface D. Tie back branch A16, black 18-pin plug casing, at a suitable location. Tie back any excess cable to the standard wiring harness. 090 1072 Z © BMW AG, Munich 01 29 0 420 167 8/2006 (Z/Z)

  • Page 23: To Install The Acm Unit And Universal Can Interface For E60, E61 And E63, E64 Cars

    Connect plugs to ACM unit C as follows: - Plug (2) of the existing signal cable (violet 10-pin) - Branch A15 (black 26-pin socket casing) - Branch B2 (white 10-pin plug) 060 1093 Z © BMW AG, Munich 01 29 0 420 167 8/2006 (Z/Z)
  • Page 24 CAN interface D. Tie back branch A16, black 18-pin plug casing, at a 060 1103 Z suitable location. Tie back any excess cable to the standard wiring harness. © BMW AG, Munich 01 29 0 420 167 8/2006 (Z/Z)

  • Page 25: Concluding Work And Coding

    By turning and pressing the controller, you can now select or disable systems that have or have not been installed. Selected and non-selectable systems are shown in black. Selectable systems are shown in white. - Exit the Service Menu - Conduct a function test - Re-assemble the car © BMW AG, Munich 01 29 0 420 167 8/2006 (Z/Z)

  • Page 26: Initialisation Of The Acm Unit

    - Disconnect branch A15 and connect the previously disconnected cable back into pin 12 - Connect branch A15 to ACM unit C and switch on the ignition Initialisation has been performed. © BMW AG, Munich 01 29 0 420 167 8/2006...

  • Page 27: Circuit Diagram

    KCAN H KCAN H KCAN H KCAN H CAN Out Low KCAN L KCAN L KCAN L KCAN L CAN Out High CAN In Low Menu Menu CAN In High © BMW AG, Munich 01 29 0 420 167 8/2006 (Z/Z)
  • Page 28 Black 12-pin socket casing X13813 All the designations marked with an asterisk (*) apply only to these installation instructions or this circuit diagram. Cable colours Brown Yellow Black Transparent © BMW AG, Munich 01 29 0 420 167 8/2006 (Z/Z)

This manual is also suitable for:

3 series6 series5 series65 50 0 418 00265 50 0 422 701

Table of Contents