Cleaning The Professional Cappuccino Frother; Dismantling And Rinsing The Professional Cappuccino Frother; Rinsing The Easy Cappuccino Frother - Jura Ena 5 Instructions For Use Manual

Cleaning the Professional Cappuccino Frother

To ensure that the Professional Cappuccino
Frother works perfectly, you should clean it daily
when you have been preparing milk.
CAUTION
If the wrong cleaning agent is used, the machine
could be damaged and/or detergent residues
could be left in the water.
Only use original JURA care products.
T
E The ENA will not prompt you to clean the
Professional Cappuccino Frother.
E The JURA Cappuccino Cleaner is available
from stockists.
Remove the milk pipe from the milk carton
T
or milk container.
Pour 250 ml of fresh water into a receptacle
T
and add one capful (max. 15 ml) of the
Cappuccino Cleaner.
Immerse the milk pipe in the receptacle.
T
Place another receptacle under the nozzle.
T
Set the selector lever of the nozzle to the
T
milk foam or milk
p
Turn the Rotary Switch until
g T
displayed.
Press the Rotary Switch.
k T
HEATING
appears as soon as the ENA is
READY
sufficiently heated.
Turn the switch to position
l T
, the nozzle and pipe are cleaned.
STEAM
Turn the switch clockwise to position
y T
soon as the receptacle holding the
Cappuccino Cleaner is empty.
position.
t
is
STEAM
.
m
as
o
Rinse the receptacle thoroughly, fill with
T
250 ml of fresh water and immerse the milk
pipe in the water.
Empty the receptacle under the nozzle and
T
replace under the nozzle.
Turn the Rotary Switch until
g T
displayed.
Press the Rotary Switch.
k T
HEATING
appears as soon as the ENA is
READY
sufficiently heated.
Turn the switch to position
l T
, the nozzle and pipe are rinsed
STEAM
with fresh water.
Turn the switch clockwise to position
y T
soon as the receptacle holding the water is
empty.
Dismantling and rinsing the Professional
Cappuccino Frother
Carefully remove the Professional Cappuc-
T
cino Frother from the Connector System
Dismantle the frother completely.
T
Rinse all parts thoroughly with running
T
water.
Reassemble the Professional Cappuccino
T
Frother and attach it to the Connector
System .
©

Rinsing the Easy Cappuccino Frother

To ensure that the Easy Cappuccino Frother works
perfectly, you should rinse it with water whenever
you have prepared some milk.
ENA 5
is
STEAM
.
m
as
o
en
it
.
©
en
en
it
27