Rinsing The Professional Cappuccino Frother; Cleaning The Professional Cappuccino Frother - Jura ENA 3 Instructions For Use Manual

ENA 3
Press the Rotary Switch.
k T
EMPTY TRAY
Continue with the third prompt to take
T
action (indicated by
section 'Descaling the machine following
a prompt'.

Rinsing the Professional Cappuccino Frother

To ensure that the Professional Cappuccino
Frother works perfectly, you should rinse it with
water whenever you have prepared some milk.
The ENA will not prompt you to rinse the
E
Professional Cappuccino Frother.
Remove the milk pipe from the milk carton
T
or milk container.
Fill a receptacle with fresh water and
T
immerse the milk pipe in the water.
Place another receptacle under the nozzle.
T
Set the selector lever of the nozzle to the
T
milk foam or milk
p
Turn the Rotary Switch until
g T
displayed.
Press the Rotary Switch.
k T
HEATING
appears as soon as the ENA is
READY
sufficiently heated.
Turn the switch to position
l T
, the nozzle and pipe are rinsed.
STEAM
Turn the switch to position
y T
clean water flows into the receptacle.
26
), as described in the
T
position.
t
is
STEAM
.
m
as soon as
o

Cleaning the Professional Cappuccino Frother

To ensure that the Professional Cappuccino
Frother works perfectly, you should clean it daily
when you have been preparing milk.
CAUTION
If the wrong cleaning agent is used, the machine
could be damaged and/or detergent residues
could be left in the water.
Only use original JURA care products.
T
E The ENA will not prompt you to clean the
Professional Cappuccino Frother.
E The JURA Cappuccino Cleaner is available
from stockists.
Remove the milk pipe from the milk carton
T
or milk container.
Pour 250 ml of fresh water into a receptacle
T
and add one capful (max. 15 ml) of
Cappuccino Cleaner.
Immerse the milk pipe in the receptacle.
T
Place another receptacle under the nozzle.
T
Set the selector lever of the nozzle to the
T
milk foam or milk
p
Turn the Rotary Switch until
g T
displayed.
Press the Rotary Switch.
k T
HEATING
appears as soon as the ENA is
READY
sufficiently heated.
Turn the switch to position
l T
, the nozzle and pipe are cleaned.
STEAM
Turn the switch clockwise to position
y T
soon as the receptacle holding the
Cappuccino Cleaner is empty.
position.
t
is
STEAM
.
m
as
o