Frothing Milk; Making Cappuccino And Hot Milk With The Professional Cappuccino Frother; Dispensing Or Frothing Milk For An Extended Period (With The Professional Cappuccino Frother); Cleaning The Professional Cappuccino Frother - Jura IMPRESSA S9 avantgarde Instructions For Use Manual

You can also change the amount of water set while the
machine is brewing coffee. Open the programming door.
Turn the Rotary Switch (4) until the display indicates the
required amount (ML). The amount of water can be selected
in increments of 5 ML.
The amounts given in ML are approximate values and may
vary from the effective quantity.

10. Frothing milk

The IMPRESSA is ready to froth milk when both Steam key lights
light up constantly.
If the lights are off, press one of the two Steam keys
The first time you use your coffee machine, remove the pro-
tective cover from the Professional Cappuccino Frother (24).
The protective cover is used only during transport as protec-
tion to prevent the ingress of contaminated materials.
10.1 Making cappuccino and hot milk with the
Professional Cappuccino Frother
Fill the milk pitcher with milk or dip the milk hose directly into
the milk.
Place a cup under the Professional Cappuccino Frother.
Press the Steam Portion key
STEAM PORTION
The machine will froth or heat milk according to the time you
programmed (see "Programming the steam portion", Chapter
13.8)
For cappuccino, turn the selector switch (1, Fig. 7) to (2).
For hot milk, turn the selector switch (1, Fig. 7) to (3).
12
.
.
Now place the cup with the cappuccino froth or hot milk under
the coffee spout (18) and make a coffee of your choice.
10.2 Dispensing or frothing milk for an extended
period (with the Professional Cappuccino
Frother)
Fill the milk container with milk or immerse the pipe directly in-
to the milk.
Place a cup under the Professional Cappuccino Frother.
Press the Extended Steam draw-off button
DRAW OFF STEAM
The frothing operation or heating of milk will continue until you
press the Extended Steam draw-off button again.
For milk foam, turn the selector switch (1, Fig. 7) to area 2.
For hot milk, turn the selector switch (1, Fig. 7) to area 3.

10.3 Cleaning the Professional Cappuccino Frother

After heating or frothing milk, you should clean the Profes-
sional Cappuccino Frother. We recommend cleaning it on a
daily basis.
Your IMPRESSA will not prompt you to clean the Profes-
sional Cappuccino Frother.
The Professional Cappuccino Frother is best cleaned using
the JURA Auto-Cappuccino cleaner. Please contact an au-
thorized dealer. We recommend cleaning these devices daily.
Place a receptacle under the Professional Cappuccino Frother
(24).
Fill a second receptacle with 2.5 dl of fresh water and add one
capful of the Auto-Cappuccino Cleaner.
.