Installation Procedure
1. Install the IAC valve on the throttle body with the bolts.
Tighten
f Tighten the bolts to 1 N·m (9 lb in.).
2. Connect the IAC valve electrical connector.
3. Install the negative battery cable.
Common Chamber
Removal and Installation Procedure
Refer to Common Chamber in Engine Mechanical.
Accelerator Cable Assembly
Removal Procedure
1. Remove the engine cover.
TROOPER 6VE1 3.5L ENGINE DRIVEABILITY AND EMISSIONS
TS23745
2. Loosen the adjusting nut on the cable bracket
mounting on the common chamber.
3. Remove the accelerator control cable (on the throttle
valve end).
6E–479
101RW005
101RW006