Isuzu Trooper 1999 Workshop Manual page 1551

7B–12 MANUAL TRANSMISSION
21. Connect the backup lamp switch, 4WD indicator
switch, 1-2 and 3-4 indicator switch harness
connectors.
22. Install the front propeller shaft and tighten the fixing
bolts and nuts specified torque.
Torque: 63 N·m (46 lb ft)
23. Install the rear propeller shaft and tighten the fixing
bolts and nuts specified torque.
Torque: 63 N·m (46 lb ft)
24. Install transfer protector and tighten the fixing bolts
specified torque.
Torque: 37 N·m (27 lb ft)
25. Install the transmission control lever and transfer
control lever.
26. Install the grommet assembly.
27. Install the front console assembly.
28. Install the gear control lever knob.
230RW005
29. Connect battery ground cable.
30. Install engine hood.
235RX001