Isuzu Trooper 1999 Workshop Manual page 1599

7B–60 MANUAL TRANSMISSION
2. Using a pin punch and hammer, drive in the
slotted spring pin (2) to the shift lever housing.
NOTE: Be carefull not to drop the slotted spring pin.
3. Apply sealant
equivalent) to the plug (1) thread.
4. Using hexagon wrench, install and torque the
plug (1).
Torque: 18 N·m (13 lb ft)
5. Clean up the bolts and bolt hole.
230RW002
(THREE BOND 1344
220RW010
6. Using 6 bolts, install the gear control box through
the gasket.
Torque 18 N·m (13 lb ft)
38. Install clutch housing.
or
1. Install the clutch housing to the transmission
case.
Torque: 36 N·m (27 lb ft)
NOTE: Tighten the all bolts evenly.
230RW001
241RW001