Isuzu Trooper 1999 Workshop Manual page 1296

8. Remove the undercover.
9. Disconnect the wiring connector to the fuel pump.
10. Disconnect the wiring connector to the fuel gauge
unit.
11. Remove the fuel gauge unit connector from the
bracket.
12. Disconnect the EVAP vapor hose.
13. Disconnect the fuel supply hose.
14. Disconnect the fuel return hose.
f Plug the hoses to prevent dust from entering the
hoses.
15. Remove the fuel tank retaining bolts on both sides.
TROOPER 6VE1 3.5L ENGINE DRIVEABILITY AND EMISSIONS
TS23797
TS23769
16. Remove the fuel tank.
Installation Procedure
1. Install the fuel tank.
f Place the flanges on the left and right side of the
tank on the bracket.
2. Install the fuel tank retaining bolts.
Tighten
f Tighten the fuel tank retaining bolts to 36 N·m
(27 lb ft.).
3. Connect the fuel return hose.
4. Connect the fuel supply hose.
5. Connect the EVAP vapor hose.
6. Connect the wiring connector for the fuel gauge unit.
7. Connect the fuel gauge wiring connector to the
bracket.
6E–495
TS23770
TS23770