6E–506
TROOPER 6VE1 3.5L ENGINE DRIVEABILITY AND EMISSIONS
Installation Procedure
1. Splice the wires using splice clips and rosin core
solder.
2. Wrap each splice to insulate.
3. Wrap the splice with mylar and with the drain
(uninsulated) wire.
4. Tape over the whole bundle to secure.
Twisted Leads
Removal Procedure
1. Locate the damaged wire.
2. Remove the insulation as required.
049
Installation Procedure
1. Use splice clips and rosin core solder in order to splice
the two wires together.
050
051
052