Removal
1. Disconnect the battery ground cable.
2. Remove four fixing screws and disconnect the switch
connectors to remove the front console assembly(4).
3. Push the lock from the back side of the front console
assembly to remove the seat heater switch(5).
Removal and Installation
Refer to the removal and installation on steps of the
Starter Switch in this section.
825RW023
Seat Heater Switch
825RW025
Key Remind Switch (Starter Switch)
LIGHTING SYSTEM
Installation
To install, follow the removal steps in the reverse order,
noting the following point.
1. Push in the switch with your fingers until it locks
securely.
Installation
To install, follow the removal steps in the reverse order,
noting the following point.
1. Push the switch with your fingers until it locks
securely.
8A–21