Isuzu Trooper 1999 Workshop Manual page 1546

f Remove the dust cover from the clutch housing.
17. Support the transfer case with a jack.
18. Remove two engine rear mount nuts.
19. Remove third crossmember.
20. Disconnect four oxygen sensor connectors from the
transmission harness.
21. Remove the right front exhaust pipe and catalytic
converter assembly.
22. Remove the harness heat protector.
23. Remove two engine rear mount bolts.
24. Remove the rear mount from the transmission.
25. Remove three flywheel under cover.
26. Support the transmission with a transmission jack
and then remove jack from the transfer case side.
MANUAL TRANSMISSION
27. Use the clutch release bearing remover J–39207 to
disconnect the clutch release bearing from the clutch
pressure plate.
022RT002
Release bearing disconnection
1. Pull the shift fork toward the transmission to press
the clutch release bearing against the clutch.
2. Insert the clutch release bearing remover
between the wedge collar and the release
bearing.
3. Turn the remover to separate the release bearing.
220RS001
7B–7
220RS002