CLUTCH
7C–8
4. Mark the flywheel, clutch cover and pressure plate lug
for alignment when installing.
5. Remove
the
release
transmission case .
6. Remove the shift fork snap pin.
7. Remove the shift fork pin and shift fork (4) from the
front cover.
8. Remove the front cover bolts.
9. Remove the front cover (5) from the transmission
case.
10. Remove flywheel assembly and crankshaft bearing,
do not remove except for replacement.
11. Use the remover J–5822 and sliding hammer
J–23907 to remove the crankshaft bearing
bearing
(3)
from
the
220RW088
015RW050
Inspection and Repair
Make necessary correction or parts replacement if wear,
damage, or any other abnormal condition are found
through inspection.
Pressure Plate Assembly
1. Visually check the pressure plate friction surface for
excessive wear and heat cracks.
2. If excessive wear or deep heat cracks are present,
the pressure plate must be replaced.
Pressure Plate Warpage
201RS002
201RS003