Fog Light Assembly; Fog Light Adjustment; Front Side Marker Light Bulb; Removal - Isuzu Trooper 1999 Workshop Manual

Removal

1. Disconnect the battery ground cable.
2. Remove two nuts from the bracket.
3. Disconnect the connector.
4. Remove the fog light assembly(1).

Installation

To install, follow the removal steps in the reverse order.
Removal
1. Disconnect the battery ground cable.
2. Remove the screw at the upper portion of the light
bracket and then remove the bracket from the fender.
3. Remove the front combination light assembly(1).
4. Remove the front side marker light socket(2) by
turning it counterclockwise.
5. Pull out the bulb(3) from the socket.

Fog Light Assembly

825RW104

Front Side Marker Light Bulb

LIGHTING SYSTEM
CAUTION: After installing the fog light, be sure to
adjust the fog light aim.

Fog Light Adjustment

Turn the adjusting screw with a screwdriver to adjust the
aim of the fog light vertically.
Installation
To install, follow the removal steps in the reverse order.
8A–5
801RW007
801RS003