Adding Brake Fluid - TGB BLADE 250 Service Manual

Adding Brake Fluid

Before the brake fluid reservoir is removed, turn
the handle so that the brake fluid reservoir
becomes horizontal, and then remove the brake
fluid reservoir.
When maintenance brake system, will be
supposed to paint the surface or the rubber parts
catches up by the rags.
Caution
Supplement brake fluid please do not surpass the
upper limit, spilled brake fluid on painted
surfaces, plastic or rubber components may
result in their damages.
Remove the master cylinder cap and diaphragm.
Increases the high quality brake fluid, uses by all
means must with the trade mark brake fluid joins in
the master cylinder.
Clean the dirty brake disk.
Caution
● The dirty brake lining or disk will reduce the
brake performance.
● To mixed non-compatible brake fluid will
reduce brake performance.
● Foreign materials will block the system
causing brake performance to be reduced or
totally lost.
To this chapter tents
14. FRONT BRAKE & FRONT WHEEL
Upper level
Master cylinder
Screw
Master cylinder cap
Diaphragm
14-7