Disk Brake System Inspection - TGB BLADE 250 Service Manual

14. FRONT BRAKE & FRONT WHEEL

Disk Brake System Inspection

Inspection
By visual examination whether divulges or the
damage, with spanner inspection brake tube seam
whether becomes less crowded, and the inspection
handle bar turn right or turn left, or pressure the
cushion, whether besides the
pipeline protection department, whether there is
interferes, contacts other parts of.
Check the brake from behind the brake caliper.
The brake pad must be replaced with new lining
when the brake pad wear limit reaches the brake
disk.
Caution
● Check the front brake lining must be removed
front wheel first.
Park the ATV on a level ground, and check if
fluid level is under the "LOWER" mark.
Recommended Brake Fluid: WELL RUN
BRAKE OIL (DOT 4).
Caution
● The vehicles inclined or just stop, the
survey oil level could not be accurate, had
to settle the
3~5 minute.
● In order to prevent has the chemical
change, please do not use counterfeiting
or other unclear trade marks brake fluid.
● Uses by all means must with the trade
mark brake fluid, guarantees the ghost
vehicle efficiency.
14-6
To this chapter contents