TGB BLADE 250 Service Manual page 172

Knuckle
Remove
Remove front wheel, front brake caliper, front
wheel hub and brake disk.
Remove cotter pin and tie-rod nut, remove tie rod.
Remove cotter pin and ball joint nut.
Remove upper and under ball joints by ball joint
driver.
Remove the knuckle.
Special Tool：ball joint driver
Inspection
Inspect the upper and under ball joints and
knuckle for damaging or cracking.
Installation
Install in reverse order of removal procedures.
Torque value:
Steering tie-rod nut
Ball joint nut
After tightened the nuts, install the cotter pins.
To this chapter contents
15. STEERING / FRONT SUSPENSION
5.0kgf-m
5.0kgf-m
Tie-rod
Nut
Cotter pin
Ball joint
Knuckle
Ball joint
Universal holder
Ball joint
15-7