Connecting The Gvr3550 - Grandstream Networks GVR3550 Quick Installation Manual

CONNECTING THE GVR3550:

1. Connect a display device to the HDMI or VGA interface.
2. Connect the network cable from RJ45 interface of
GVR3550 to a network switch (Gigabit recommended).
3. Connect power adapter from device to power source.
4. When the GVR3550 is powered on successfully, it will
display the local view main screen as shown below.
Note:
GVR3550 can automatically adapt to 1080p or 720p HDMI monitor.
VGA doesn't support automatic resolution matching. When VGA and HDMI
port are both connected, only the HDMI display will be active. User can manu-
ally configure output display and resolution from the configuration menu.
~ ~
5
Optional Devices:
USB mouse/keyboard:
Connect a mouse or keyboard to the USB port to use with
the local view of GVR3550.
USB storage device:
Connect an USB storage device to the USB port to store
video or picture files.
eSATA device:
Connect the eSATA device to the corresponding interface
on the back panel of the GVR3550. Power up the eSATA
device or use USB cable to supply power (the connection
mode is in accordance with eSATA specification).
Output devices:
GVR3550 supports microphone and (amplified) speaker
with RCA interface.
Alarm devices:
1. Connect alarm input device to alarm input port.
2. Connect alarm output device to alarm output port.
Note:
Please consult the User Manual to setup optional devices.
Additional configuration may be required.
If mouse/keyboard not working, it may be incompatible with the GVR3550.
~ ~
6