Optionally Resetting Authenticator Operation - HP Q.11.XX Manual

6. Optionally Resetting Authenticator Operation

After authentication has begun operating, these commands can be used to
reset authentication and related statistics on specific ports.
Syntax: aaa port-access authenticator < port-list >
[initialize]
On the specified ports, blocks inbound and outbound
traffic and restarts the 802.1X authentication process.
This happens only on ports configured with control auto
and actively operating as 802.1X authenticators.
[reauthenticate]
On the specified ports, forces reauthentication (unless
the authenticator is in "HELD" state).
[clear-statistics]
On the specified ports, clears authenticator statistics
counters.
Configuring Port-Based and Client-Based Access Control (802.1X)
Configuring Switch Ports as 802.1X Authenticators
8-25