Messages Related To Radius Operation - HP Q.11.XX Manual

Procurve 2510 series switches
Table of Contents

Advertisement

Message
Can't reach RADIUS server < x.x.x.x >.
No server(s) responding.
Not legal combination of authentication
methods.

Messages Related to RADIUS Operation

RADIUS Authentication, Authorization and Accounting

Messages Related to RADIUS Operation

Meaning
A designated RADIUS server is not responding to an
authentication request. Try pinging the server to
determine whether it is accessible to the switch. If the
server is accessible, then verify that the switch is using
the correct encryption key and that the server is correctly
configured to receive an authentication request from the
switch.
The switch is configured for and attempting RADIUS
authentication, however it is not receiving a response
from a RADIUS server. Ensure that the switch is
configured to access at least one RADIUS server. (Use
show radius.) If you also see the message Can't
reach RADIUS server < x.x.x.x >, try the
suggestions listed for that message.
Indicates an attempt to configure local as both the
primary and secondary authentication methods. If local
is the primary method, then none must be the secondary
method.
5-39

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

U.11.xxProcurve 2510-24Procurve 2510-48

Table of Contents