Overview; Basic Operation - HP Q.11.XX Manual

Procurve 2510 series switches
Table of Contents

Advertisement

Configuring and Monitoring Port Security

Overview

Note
Note
9-2

Overview

ProCurve switch 2510-24 (J9019A/J9019B): Port security, Web/MAC authenti-
cation and 802.1X are not available on the 1000 Mbps uplink ports. (On J9019A,
these features are also not available on ports operating at 10 Mbps.)
Feature
Displaying Current Port Security n/a
Configuring Port Security
Intrusion Alerts and Alert Flags
Using Port Security, you can configure each switch port with a unique list of
the MAC addresses of devices that are authorized to access the network
through that port. This enables individual ports to detect, prevent, and log
attempts by unauthorized devices to communicate through the switch.
This feature does not prevent intruders from receiving broadcast and multi-
cast traffic.

Basic Operation

Default Port Security Operation. The default port security setting for
each port is off, or continuous. That is, any device can access a port without
causing a security reaction.
Intruder Protection. A port that detects an "intruder" blocks the intruding
device from transmitting to the network through that port.
Default
Menu
CLI
page 9-10
disabled
page 9-12
n/a
page 9-35
page 9-33
Web
page 9-28
page 9-28
page 9-36

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

U.11.xxProcurve 2510-24Procurve 2510-48

Table of Contents