Page of 318
Download Print This PagePrint Bookmark Comment

HP Q.11.XX Manual: Configuring The Switch's Tacacs+ Authentication Methods

Procurve switches.
Hide thumbs

Advertisement

Configuring the Switch's TACACS+ Authentication
Methods
The aaa authentication command configures TACACS+ access control for the
following access methods:
Console
Telnet
SSH
The command specifies whether to use a TACACS+ server or the switch's local
authentication, or no authentication in some situations (meaning that if the
primary method fails, authentication is denied). The command also reconfig-
ures the number of access attempts to allow in a session if the first attempt
uses an incorrect username/password pair.
Syntax: aaa authentication
< console | telnet | ssh >
Selects the access method for configuration.
< enable | login> <primary-method> <backup-method>
enable
write) access for the authentication method
login
access for the authentication method.
<primary-method> —
for access.
<backup-method> —
the primary method is not able to check the user's
credentials.
<login privilege-mode >
Enables TACACS+ for single login. The switch
authenticates your username/password, then requests
the privilege level (Operator orManager) that was
configured on the TACACS+ server for this username/
password. The TACACS+ server returns the allowed
privilege level to the switch. You are placed directly into
Operator or Manager mode, depending on your privilege
level.
Default: Single login disabled.
Configuring TACACS+ on the Switch
Configures "enable" privilege level (read/
Configures "login" privilege level (read-only)
The primary authentication method
The authentication method to use if
TACACS+ Authentication
.
4-11

Advertisement

   Related Manuals for HP Q.11.XX

This manual also for:

U.11.xx

Comments to this Manuals

Symbols: 0
Latest comments: