HP Q.11.XX Manual page 93

Procurve 2510 series switches
Table of Contents

Advertisement

N o t e o n
E n cr y p t i o n K e y s
Syntax: tacacs-server host < ip-addr >
Adds a TACACS+ server and optionally assigns a server-
specific encryption key.
[no] tacacs-server host < ip-addr >
Removes a TACACS+ server assignment (including its
server-specific encryption key, if any).
tacacs-server key <key-string>
Enters the optional global encryption key.
[no] tacacs-server key
Removes the optional global encryption key. (Does not
affect any server-specific encryption key assignments.)
tacacs-server timeout < 1-255 >
Changes the wait period for a TACACS server response.
(Default: 5 seconds.)
Encryption keys configured in the switch must exactly match the encryption
keys configured in TACACS+ servers the switch will attempt to use for
authentication.
If you configure a global encryption key, the switch uses it only with servers
for which you have not also configured a server-specific key. Thus, a global
key is more useful where the TACACS+ servers you are using all have an
identical key, and server-specific keys are necessary where different
TACACS+ servers have different keys.
If TACACS+ server "X" does not have an encryption key assigned for the
switch, then configuring either a global encryption key or a server-specific key
in the switch for server "X" will block authentication support from server "X".
TACACS+ Authentication
Configuring TACACS+ on the Switch
key-string
[key <
>]
4-19

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

U.11.xxProcurve 2510-24Procurve 2510-48

Table of Contents