Triumph Speed Triple Service Manual page 53

Cylinder Head
i
5. Apply silicone sealer to the areas arrowed in the
diagram below.
6. Fit the cam cover, ensuring that the gasket and
1
seals remain in the correct positions.
7. Refit the dowels to the cam cover before locating
it to the head.
1. Dowels
i
8. Fit the cam cover screws and screw seals, then
tighten until finger tight.
9.
Finally, tighten the cam cover screws, in same
order as for removal, to 10 Nm.
10. Refit the air deflector shield and retain with the
clips.
11. Refit the throttle cables and adjust (see page 10-
95).
12. Refit the secondary air injection hose to the reed
valves (see page 10-1 10).
1. Spring-close hose clip
2. Secondary air injection hose
3.
Reed valve assembly
13. Fit the ignition coils and reconnect.
1. Coils
14. Refit the airbox (see page 10-93).
15. Refit the fuel tank (see page 10-88).
16. Refit the side panel assembly (see page 16-9).
17. Reconnect the battery positive (red) lead first.
18. Refit the seat (see page 16-9).
Service Manual
-
Speed Triple
3.7