Triumph Speed Triple Service Manual page 368

Note:
*
The rear light is a sealed for life and must
be replaced in the event of a failure.
Bulb Replacement
1. Rear Light Unit
2. Rear Light Bracket Fixings
Rear Light Unit Replacement
1.
Remove the seat (see page 16-8).
2.
Disconnect the battery negative (black) lead first.
3.
Remove the side panels (see page 16-9).
4. Release the fixings securing the light unit
5.
Disconnect the multi-plug.
,
6.
Withdraw the unit-on its bracke
7.
Separate the light from its bracket.
8.
Installation is the reverse of the removal
procedure.
Note:
*
Tighten the rear light bracket fixings to
9 Nm.
Tighten the rear light to bracket fixings to
4 Nm.
0
Reconnect the battery positive (red) lead
first.
ccoa
1. Indicator Lens
2 .
Screw
The lens on each indicator light is held in place by a
securing screw located in the body of the light.
Release the screw and remove the amber lens to gain
access to the bulb for replacement.
Bulb Replacement
2.
Carefully remove the rubber bulb holder from the
back of the light unit and detach the bulb.
3.
Installation is the reverse of the removal
procedure.
Service Manual
-
Speed Triple