Triumph Speed Triple Service Manual page 195

Fuel SystemlEngine Management
(
34. ADJUST TUNE (adaption reset)
After selecting the adaption reset option, confirm or
reject the option by positioning the cursor 'pposite the
option chosen and press the Validation key '42.
If YES is chosen, a screen will confirm that adaptions
have been reset.
If NO is chosen, you will be returned to the adjust tune
menu.
Note:
Resetting the adaption values does not
adapt the motorcycle. This can only be
done by the method explained later in this
section. Adaption reset only returns
adaption values to their 'start' point.
35. BALANCE THROTT'LES
T H R O T T L E 2 1 2 3 Y P I P I / H
T H R O T T L E 3 J i J 3 Y f l P I / H
Using the BALANCE THROTTLES command, the
throttles may be balanced without the need to connect
an external device to measure the vacuum levels in
each throttle body. The diagnostic tool displays data
taken from the manifold absolute pressure sensor
reading for each throttle.
Once throttle imbalance has been reduced to a pre-
determined level, the top line of information will
display the word *BALANCED*. Under any other
conditions where imbalance is detected, nothing will
be displayed indicating that the throttles require
balancing.
Service Manual
-
Speed Triple
10.53