Clutchcable; Removal; Inspection - Triumph Speed Triple Service Manual

Clutch
j
Clutch Cable
Removal
6. Pull in the clutch lever and turn the inner cable,
anti-clockwise through the slots in the adjuster
and locknut, until the cable can be detached from
the lever by pushing downwards.
1. Remove the seat (see page 16-8).
2.
Disconnect the battery (see page 17-7).
1
3. Slacken the cable locknut and release the
adjuster at the clutch cover end to give maximum
play in the cable.
/
gaau
I
1
1. Nut/locknut Slots
2. Cable Release Point
7. Remove the cable from the motorcycle noting the
cable routing, particularly where it passes
through the air deflector shield.
1. Clutch Cable
2. Adjuster
Inspection
4.
Release the clutch cable from the actuating arm
1. Check the inner cable for free movement through
by pushing the inner cable nipple through the
the outer cable.
arm and sliding the cable
Out Of
the slot.
2.
Examine the inner cable forfrayed strands.
Detach the cable from the bracket.
3. Examine the two inner cable nipples for sians of
looseness and damage. ~ e ~ l a c e the cable if
necessary.
1. Actuating Arm
2. Inner Cable
5.
Align the lever adjuster and locknut slots.
Sewice Manual
-
Speed Triple