Triumph Speed Triple Service Manual page 324

in the general information section of this manual.
The use of brake fluids other than those D.O.T. 4
fluids listed in the general information section may
reduce the efficiency of the braking system leading
to an accident.
Observe the brake fluid handling warnings given
earlier in this section of the manual.
6.
Fill and bleed the front brakes (see page 0.0).
Always return the lever adjuster to the original
setting noted during removal. Operating the
motorcycle with lever settings which are unfamiliar
may lead to loss of control or an accident.
7. Reset the brake lever adjuster to the original
setting.
8.
Examine the system for correct operation and
fluid leaks. Rectify as necessary.
9. Connect the battery ppsitive, (red) lead first.
10. Refit the seat (see page 0.0).
11. Check for correct brake operation. Rectify as
necessary.
It is dangerous to operate the motorcycle with
defective brakes and you must have your authorised
Triumph dealer take remedial action before you ride
the motorcycle again. Failure to take remedial
action may result in reduced braking efficiency
leading to loss of motorcycle control and an
accident.
1
Before starting work, ensure the motorcvcle is
1
stabilised and adequately supported. This will help
prevent it from falling and causing injury to the
operator or damage to the motorcycle.
1. Remove the body side panel assembly (see
page 16-9).
2 .
Remove the cap from the rear bleed nipple.
3. Attach a transparent tube to the bleed nipple.
gadw
1. Bleed Nipple
2. Spanner
3. Bleed Tube
4. Place the other end of the tube in a suitable
receptacle containing new brake fluid.
/ '
,
>
,
-
A-
warning
To prevent body damage, do not spill brake fluid
onto any area of the bodywork.
Sewice Manual
-
Speed Triple