Triumph Speed Triple Service Manual page 313

rakes
I
Braking System Maintenance
Safety Precautions
I
Use only D.O.T. 4 specification brake fluid as listed
Brake fluid is hvnroscopic which means it will absorb
moisture from-tie air.' The absorbed moisture will
greatly reduce the boiling point of the brake fluid
causing a reduction in braking efficiency.
Replace brake fluid in line with the scheduled
maintenance chart. A dangerous riding condition
could result if this important maintenance item is
neglected.
Do not spill brake fluid onto any area of the
bodywork as this will damage any painted or plastic
surface.
Always use new brake fluid from a sealed container
and never use fluid from an unsealed container or
from one which has been previously opened.
Do not mix different brands of fluid. Check for fluid
leakage around brake fittings, seals and joints.
Check regularly for brake hose damage.
FAILURE TO OBSERVE ANY OF THE ABOVE
WARNINGS MAY REDUCE BRAKING
EFFICIENCY LEADING TO AN ACCIDENT.
If there has been an appreciable drop in the level of
the fluid in either brake.fluid reservoir, consult your
authorised Triumph Dealer for advice before riding.
If the brake lever or pedal feels soft when it is
applied, or if the leverlpedal travel becomes
excessive, there may be air in the brake lines or the
brake may be defective.
It is dangerous to operate the motorcycle under
such conditions and remedial action must be taken
by your authorised Triumph Dealer before riding the
motorcycle.
Failure to take remedial action may reduce braking
efficiency leading to an accident.
in the general information section of this manual.
The use of brake fluids other than those D.O.T. 4
fluids listed in the general information section may
reduce the efficiency of the braking system leading
to an accident.
Failure to change the brake fluid at the interval
specified in the scheduled maintenance chart may
reduce braking efficiency resulting in an accident.
Never use mineral based grease in any part of the
braking system or in any area where contact with
the braking system is possible. Mineral based
grease will damage the hydraulic seals in the
calipers and master cylinders.
Damage caused by contact with mineral based
grease may reduce braking efficiency resulting in an
accident.
Service Manual
-
Speed Triple