Triumph Speed Triple Service Manual page 244

0ntr0l Stepper Motor
8. Leave the plastic collar and spring on the control
stepper arm.
Removal
1. Remove the seat (see page 1'6-8).
2 . Disconnect the battery negative (black) lead first.
3.
Remove the fuel tank (see page 10-88).
4. Remove the airbox (see page 10-92).
5.
Remove the throttle bodies (see page 10-98).
6.
Remove the nylon nut, metal washer and plastic
washer attaching the idle control stepper arm to
the idle speed control lever
cdav
1. ldle control stepper arm
2. ldle speed control lever
3. Nut etc.
7. Remove the two screws securing the idle speed
control stepper motor~to~its~bracket~theniremove~~
the stepper motor in the direction shown.
cdax
1. Collar
2. Spring
Installation
1.
Ensure the ldle speed control lever is correctly
positioned in relation to the throttle cam as
shown.
cdgr
cdaw
1. ldle speed control stepper motor
2. Bracket
3. Fixings
4. Direction of removal
10.102
Service Manual
-
Speed Triple