Loading And Saving The Router Configuration; Upgrading The Firmware Of Your Router - 3Com OfficeConnect User Manual

Loading and Saving the Router Configuration

Figure 70 Configuration Screen
Select the Configuration tab to display the Configuration screen
(Figure 70).
Click BACKUP to save the current configurations of the
OfficeConnect Secure Router. You will be prompted to
download and save a file to disk.
If you want to reinstate the configuration settings previously
saved to a file, click Browse to locate the backup file on your
computer, and then RESTORE to copy the configuration back
to the Router.
For security purposes restoring the configuration does not
change the password.
If you want to reset the settings on your Router to those that
were loaded at the factory, click RESET. You will lose all your
configuration changes. The Router LAN IP address will revert
to 192.168.1.1, and the DHCP server on the LAN will be
enabled. You may need to reconfigure and restart your
computer to re-establish communication with the Router.

Upgrading the Firmware of your Router

The Upgrade facility allows you to install on the Router any new
releases of system software that 3Com may make available.
3DES and AES encryption are not shipped with the Router as
standard due to international restrictions on encryption. If your
country permits their use they can be downloaded from the
3Com web site at http://www.3com.com/
69