Figure 46 Custom Setup Screen
4
Select either All WAN PCs can access this server, or Authorized
Remote IP Address(es). If you select Authorized Remote IP
Address(es), you must specify an IP address or a range of
addresses. For example, 162.223.41.12-162.223.41.15 gives
access to all IP addresses in this range.
5
Click Add to save the settings.
PC Privileges
Access from the local network to the Internet can be controlled
on a PC-by-PC basis. In the default configuration the Router will
allow all connected PCs unlimited access to the Internet.
PC Privileges allows you to assign different access rights for
different computers on your network, restricting this access and
controlling your users' access to outside resources.
Select PC Privileges to display the PC Privileges setup screen. This
is shown in
Figure 47
below.
The Router's DHCP server has been enhanced to support PC
Privileges. If you want to control access to the Internet on a user
by user basis then you should either use the Router's DHCP
server or static addressing.
Figure 47 PC Privileges Screen
To use access control for all computers:
Click the Control PC Access to the Internet radio button.
1
Click on All PCs to setup the access rights for all computers
2
connected to the Router.
3
Check the box of a service to authorize it. Clear the box to deny
the service. See
Figure
50
48.
Need help?
Do you have a question about the OfficeConnect and is the answer not in the manual?
Questions and answers