Panasonic KX-NCP500 Networking Manual page 97

Basic Setting
Parameter
Language
Telephone Number
SIP ID
*2
SIP Password
*2
Proxy Address
*2
Proxy Port
*2
Registrar Address
Registrar Port
*2
SIP Domain
*2
Register Expire
Session Expire
*1 This setting will be overwritten by the SIP Location Hold Time Max. setting of the PBX. For details, refer to "3.17 [1-1] Slot—Card
Property - Virtual SIP Extension" in the PC Programming Manual.
*2 These parameters can also be programmed by the KX-HGT100. For details about the procedure for the KX-HGT100, refer to "Basic
Setting programming through the KX-HGT100".
Document Version 2010-08
Description
Specifies the language to be displayed on the LCD.
Specifies the extension number of the KX-HGT100.
*2
Specifies the extension number of the KX-HGT100.
Specifies the password for the KX-HGT100.
Specifies the IP address of the MPR card.
Specifies the port number associated with the IP address entered in Proxy
Address.
Specifies the IP address of the MPR card.
*2
Specifies the port number associated with the IP address entered in Registrar
Address.
Specifies the IP address of the MPR card.
Specifies the length of time (1–4294967295 seconds) that the KX-HGT100
sends the REGISTER message to the PBX.
Specifies the length of time (60–65535 seconds) after which the KX-HGT100
terminates SIP sessions when no communication is detected.
4.6.1 Registering IP Telephones
*1
IP Networking Guide 97