Panasonic KX-NCP500 Networking Manual page 70

4.5.1 Assigning the IP Addressing Information
KX-NT321
To start programming
Supply power to the IP-PT.
To set the IP address of the IP-PT
Select "Network".
IP Address*
To set the subnet mask address
Select "Subnet Mask".
To set the default gateway address (if required)
Select "Default GW".
To enter the IP address of the IP-EXT16 card in the Primary PBX (PBX IP Address)
Press HOLD to return
to the Menu screen.
Press SP-PHONE.
To enter the IP address of the Secondary PBX (If required)
Select "Secondary
PBX".
Continued on next page
70 IP Networking Guide
Press PROGRAM
while "Searching" is displayed.
Press SP-PHONE. Select "DHCP (Disable)".
1
Press SP-PHONE.
Subnet Mask Address*
Press SP-PHONE.
Default Gateway Address*
Press SP-PHONE.
Select "PBX". Press SP-PHONE.
PBX IP Address
PBX IP Address
Press SP-PHONE.
Press SP-PHONE
twice.
2
3
Select "PBX IP Press SP-PHONE.
Address".
Press SP-PHONE.
Press SP-PHONE.
Press SP-PHONE.
Press SP-PHONE.
Select "Primary
PBX".
Document Version 2010-08